BNMSX - 121 4675 EKTAPRINT L DEVELOPER

  • MSDS: BNMSX
  • Manufacturer: EASTMAN KODAK CO
  • Product Name: 121 4675 EKTAPRINT L DEVELOPER
  • National Stock Number: 6850-01-207-3906
Product Identification

Product ID:121 4675 EKTAPRINT L DEVELOPER
MSDS Date:08/29/1992
FSC:6850
NIIN:01-207-3906
MSDS Number: BNMSX

Responsible Party
EASTMAN KODAK CO.
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 716-724-4501/FAX 716-724-9656

Cage: 19139

Contractor
EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
ROCHESTER, NY 14650-1115 US

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

Ingredients

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 95-99%


STYRENE METHYLMETHACRYLATES COPOLYMER

CAS: 63149-52-0

Fraction By Weight: 1-5%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

Hazards

LD50 LC50 Mixture:ORAL RAT LD50 IS NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LOW INHALATION HAZARD FOR RECOMMENDED
HANDLING. FINELY DIVIDED SOLID. AVOID BREATHING THE DUST. MAY CAUSE
TRANSIENT EYE IRRITATION. LOW SKIN HAZARD FOR RECOMMENDED HANDLING.
EXPECTED TO BE A LOW INGES TION HAZARD.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENT LISTED BY
IARC, NTP OR OSHA AS A CARCINOGEN. MUTAGENICITY TESTS WERE
NEGATIVE.
Effects of Overexposure:EYE:PHYSICAL IRRITATION. SKIN: POSSIBLE
IRRITATION. INHALATION: RESPIRATORY IRRITATION WITH EXPOSURE TO
LARGE AMOUNTS OF DUST. INGESTED: NONE REPORTED.
Medical Cond Aggravated by Exposure:NONE REPORTED

First Aid

First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH SOAP
& WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE.
INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF NECESSARY.
INGESTED:DO N OT INDUCE VOMITING. GIVE 2 LARGE GLASSES OF MILK OR
WATER AND GET IMMEDIATE MEDICAL CARE. GIVE NOTHING BY MOUTH IF
UNCONSCIOUS. IF IRRITATION PERSISTS OR IS SEVERE,SEE A DOCTOR.

Fire Fighting

Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:POWDER IS COMBUSTIBLE AND WILL FORM
EXPLOSIVE MIXTURES WITH AIR. FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Accidental Release

Spill Release Procedures:SWEEP UP BEING CAREFUL TO CREATE AS LITTLE
DUST AS POSSIBLE OR VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM CONTACT WITH OXIDIZING
MATERIALS. DO NOT STORE ABOVE 100F. USE WITH ADEQUATE VENTILATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:RESPIRATOR WILL NOT NORMALLY BE NECESSARY. USE
NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR OR RESPIRATOR FOR DUST
IF EXPOSURE IS ABOVE THE TLV/PEL. SEE 29 CFR 1910.134 FOR
REGULATIONS PERTAINING TO RE SPIRATOR USE.
Ventilation:NORMAL ROOM VENTILATION IS SUFFICIENT. SUPPLEMENT WITH
LOCAL EXHAUST IF PEL/TLV IS EXCEEDED.
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IF PROLONGED OR REPEATED SKIN CONTACT IS
NECESSARY, IMPERVIOUS GLOVES OR OTHER PROTECTION MAY BE REQUIRED.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:140F,60C
Vapor Pres:NEGLIGIBLE
Spec Gravity:2.3
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK, FINELY GROUND POWDER, SLIGHT PLASTIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE GIVEN BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE

Disposal

Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. MFR SUGGESTS THAT DISPOSAL BE BY INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.